Gas Spring Maintenance Guide
Due to its excellent corrosion resistance, mechanical properties and good bearing capacity, stainless steel gas spring is widely used in automobile, furniture and industrial equipment and other industries. Periodically maintaining it is especially significant to secure stable, long-haul execution. In this article, we will explain in detail how to maintain stainless steel gas spring and precautions.
Gas Spring Maintenance Guide
Check regularly
1.1 visual examination
Visual inspection can be done regularly on stainless steel gas springs for any substantial damage, corrosion or leaks. Based on the appearance of the gas spring, ensure that the surface is smooth without rusting or scratches.
1.2 functional test
Run gas spring to check whether expansion and retracting smooth, whether have Cottonwood or abnormal noise. Any abnormal performance could signal trouble, and should be inspected at once.
Cleaning and maintenance
2.1 surface cleaning
To clean the outside of the gas spring and remove dust and dirt use a mild detergent and a soft cloth. Do not use corrosive cleaning agents to avoid damage to the surface coating or seals.
2.2 maintenance of seals
Inspect seals periodically for wear or aging. Make sure any dirt or other impurities are located around the seals, otherwise they may fall internally to gas springs.
Storage conditions
3.1 temperature control
All stainless steel gas springs must be stored over a dry but cool area and stored away from direct light and extreme temperatures. Internal gas pressure increases with temperature which can affect the performance of Gas Springs.
3.2 properly placed
When you put the Stainless steel Gas Springs into storage, stand it up and avoid that unnecessary pressure on the seal. It helps to increase the service life of the gas spring.
Installation inspection
4.1 install correctly
Verify that the Stainless steel Gas Springs have been fitted correctly, following the manufacturers guidelines. The installation angle is incorrect, resulting in premature failure of gas spring.
4.2 inspection of fixtures
Check the air spring fixing frequently, whether in the screw and other linking place is tight, don't loose. If wear or looseness is found, it should be replaced in a timely manner.
Stress maintenance
5.1 pressure check
Gas Springs will bleed off pressure over time while in use. In cases where the support of the gas spring is found to be insufficient, it may be necessary to verify the internal gas pressure. Monitor and adjust the pressure as prescribed by the manufacturer.
5.2 maintenance records
Follow up Stainless steel Gas Springs maintenance Record: Including the date of inspection and replacement reason and operation. This assists in following the use of gas springs and maintenance records.
Replacement consideration
6.1 service life
Be aware of the Stainless steel Gas Springs service life, Generally from 20,000 to 50,000 cycles, which can vary depending on the use conditions. When the function of gas spring is obviously reduced, it should be considered to replace.
6.2 compatibility
If there is a replacement requirement, the new gas spring is also required to meet the original gas spring specification (force, length, stroke, etc.) to ensure it can work in specific applications.
Professional services
7.1 consult experts
If any abnormal phenomenon is found in the use process persists, or gas spring damage, it is recommended to consult professional personnel for timely testing and maintenance. Gas Springs can be kept running longer with professional maintenance.
7.2 maintenance training
Educate core workers about gas spring knowledge about maintenance, improve their ability to judge the status of gas spring, ensure gas spring is safe and reliable in use.
Conclusion
In order to ensure the long-term effective operation of stainless steel gas spring, the maintenance of stainless steel gas spring is a key link. Such as through regular inspection, cleaning, proper storage and professional maintenance can significantly Both improve the performance, and life of Gas Springs. Gas springs complement each other through skills, and good habits will maximize their role. The gas spring can not only meet the needs of daily use, but also can work steadily in a more demanding environment through effective maintenance, to ensure the performance of all kinds of equipment.
