gas spring

Function:

A lockable gas struts is a pneumatic component that achieves compression and expansion by controlling the inflow and outflow of gas. Its structure mainly consists of cylinder, end cover and piston. When the piston moves, gas enters and exits, thereby achieving compression and expansion of the spring. The controllable gas spring can control the inlet and outlet of gas and the pressure of gas through pressurization and decompression, thereby achieving different elastic characteristics of the spring.

Features:

As a new type of component, the application fields of controllable gas springs are still expanding. In the future, controllable gas springs can be more widely used in robots, standardized production lines, smart warehouses, smart homes and other fields to achieve intelligent, green, high-quality production and lifestyle.

Advantages:

adjustable locking Gas springs are widely used in the automotive field and are often used in automotive suspension systems, seat adjustment systems, armrest boxes and other parts. Compared with traditional spring systems, controllable gas springs have better shock absorption and adjustment performance, and can achieve optimal adjustment under different road conditions.

Application scenarios:

Massage chair

Medical bed

Lift table

Office chair

Electric wheelchair

Parameters:

Lockable Gas Spring:

Specification of locking:

FAQ:

1. What are JUTENG gas springs filled with?

As a leading gas spring factory in china , we only use nitrogen as the pressure medium in JUTENG gas springs. About 75% of the air we breath consists of this gas. Nitrogen is absolutely safe and harmless to health. In addition, nitrogen does not burn. On the contrary, nitrogen is used in the chemical industry to prevent and extinguish fires. In addition, every JUTENG pneumatic spring contains flame-retardant oil to lubricate the seals and to achieve certain functions, such as damping or rigid locking.

2. How high is the pressure in a gas spring?

The filling pressure of JUTENG gas springs depends on the extension force and the geometry and is between 5N and 3000N.

3. Should gas spring be installed with the piston rod facing up or down?

In general, gas springs should be installed with the piston rod facing down to ensure the piston rod seal is lubricated and to reduce the permeation of nitrogen through the seal. However, the opposite installation may be necessary in some special cases, for example if the gas spring requires a very specific damping characteristic. In such cases, the lubrication of the piston rod seal must be ensured by special measures (space mat).

4. What is "F1" force?

The "F1 force" is the designed force of gas springs. This is measured when the piston rod of the gas spring is extended to 5 mm. It should be noted that the measured point of a significantly shorter position is approached with a defined speed and the value of the "F1 force" is read only about 3 seconds after the measurement devices comes to a standstill. The measurement must take place at 20°C gas spring and room temperature.

5. Does the force of the gas spring change when displacing the piston rod?

Yes. The inner volume of the gas spring is closed to the outside. This means that the filled gas volume can only occupy the free space in the pressure pipe that is not needed for components or oil. By pushing the piston rod in, this free space [V] is reduced by the inserted piston rod volume. Because the same gas volume has a smaller volume available, the pressure [p] in the gas spring increases.

6. Can gas springs be repaired?

No. All gas springs and dampers are by a plastic deformation of the external pipes during production. This makes it impossible to open the gas spring to replace individual components without destroying it.

7. How long can the gas springs be stored?

The storage of gas springs has no negative consequences on their function if it is ensured that the piston rods point down and no dirt accumulates on the piston rod. If gas springs are not actuated for a long time, they only have a slightly increased amount of friction during the first retraction. However, this effect is equalized after the first actuation and the gas spring then again exhibits the usual friction values.

8. Does the temperature affect the function of gas springs?

Yes. However, three temperatures ranges must be distinguished between. Between -40°C and +80°C (operating range), the temperature only affects the pressure of the gas in the gas spring.

The temperature has an additional effect on the damping behavior of the gas springs. The temperature increase makes the oil be less viscous, which reduces the oil's resistance to the flow of the piston. This results in less damping. Likewise, the damping increases with a lowering temperature.

Manufacturer superiority:

We are a gas spring manufacturer with 12 years of production experience. The gas spring company has advanced automated production equipment, and the daily production volume can be as high as 100,000 pieces per day. A complete product quality management system can ensure a 100% qualification rate for gas springs without any defective products. The excellent R & D team provides strong driving force in product development, ensuring that customers are provided with excellent solutions and perfect new products. Coupled with efficient company operation management, gas springs can have a more competitive product price. The company's product lines have spread across all walks of life, including support gas springs, controllable gas springs, dampers, tension gas springs, etc. These product types can be widely used in various fields. In addition, in order to better promote our products, we provide customers with a 5-year warranty commitment for gas springs.

Lockable gas spring could be used to massage chair, medical equipments pacts, bus seat and others control lift speed support parts.

Note: Because the gas spring is non-standard, the above is only part of model. We could customized according to customer's requirements.